Maintenance-free

Pressure stability
Deformation in the rubber leads to higher wear and quickly impacts pressure stability = holding pressure in the chambers; reflux occurs in the stator.

Operating temperature
Friction causes heat and this has a negative impact on the rubber of the stator.
It is therefore important to reduce the heat in the stator by using a suitable rubber compound and through fast heat dissipation.
Irregular rubber thicknesses prevent fast heat transmission.

Pre-stress and pump's operating range
Maintenance-free stator "Ready-to-go" – pre-stressed for immediate use.

Clampable

Pressure stability
Deformation in the rubber leads to higher wear and quickly impacts pressure stability = holding pressure in the chambers; reflux occurs in the stator.

Operating temperature
Friction causes heat and this has a negative impact on the rubber of the stator.
It is therefore important to reduce the heat in the stator by using a suitable rubber compound and through fast heat dissipation.
Irregular rubber thicknesses prevent fast heat transmission.

Pre-stress and pump's operating range
"Do-it-yourself" – the tension is adjusted using screws; retightening is possible to suit your needs. This means that this stator can be tuned by a professional to match the application or the material.

Stators with an integrated clamp and slotted stators that use an external clamp. If the conveying pressure decreases, the stators must be tightened. This substantially extends the service life. Robust design and high functionality are a matter of course for us.

B 4-2 mf
Machine model: RITMO L plus (5), SWING M

• Gypsum / gypsum lime plaster (5)
• Light plaster
• Lime-cement render < 3 mm (5)
• Insulating plaster (5)
• Adhesive mortar (5)
• Reinforcing mortar (5)
• Frame grouting mortar (5)
• Concrete primer
• Dispersion paint
• Finishing coats, mineral (5)
• Finishing coats, pasty (5)
• Fine filler, mineral
• Fine filler, pasty
• Loam plaster, dry (5)
• Masonry mortar
• Fire protection mortar (5)
• Thin screed (5)
• Floor fillers (5)

B 4-2 mf soft
Machine model: RITMO L plus, SWING M

• Lime-cement render < 3 mm
• Insulating plaster
• Lime-cement render > 3 mm
• Scratch coat
• Finishing coats, mineral
• Finishing coats, pasty
• Masonry mortar

B 4-2 L mf
Machine model: RITMO L

• Gypsum / gypsum lime plaster
• Light plaster
• Lime-cement render < 3 mm
• Insulating plaster
• Lime-cement render > 3 mm
• Scratch coat
• Adhesive mortar
• Reinforcing mortar
• Frame grouting mortar
• Finishing coats, mineral
• Finishing coats, pasty
• Fine filler, pasty
• Loam plaster, dry
• Masonry mortar
• Thin screed
• Floor fillers

B 4-2 with clamp
Machine model: RITMO L plus, SWING M

• Light plaster
• Lime-cement render < 3 mm
• Scratch coat
• Finishing coats, mineral
• Finishing coats, pasty

B 4-2 L clampable
Machine model: RITMO L

• Gypsum / gypsum lime plaster
• Light plaster
• Lime-cement render < 3 mm
• Insulating plaster
• Adhesive mortar
• Reinforcing mortar
• Frame grouting mortar
• Finishing coats, mineral
• Finishing coats, pasty
• Loam plaster, dry
• Concrete restoration mortar
• Floor fillers
• Building site mixture